TiLite Rigid Aero Z Series Owner'S Manual Download Page 43 | Manualshive

Page: 43 / 102

background image

TiLite

®

OM000007 - Rev. B

35

Back Canes

Backrest
Tube

Backrest
Release Cord

Adjustable Height & Angle

Backrest (Titanium or

Aluminum)

(TR Series, YR Series, YG Series, ZR Series, Aero Z
and Evo)

NOTE: The aluminum Adjustable Height and Angle
Backrest without integrated push handles is standard
on all wheelchairs listed. The titanium Adjustable
Height and Angle Backrest, is available as an option
on all chairs except the YG Series. Integrated push
handles are available as an option with either the
titanium or aluminum backrest. The instructions in this
section apply to all of these variations.

WARNING

Before using your wheelchair, make sure the
Adjustable Height & Angle Backrest is locked securely
in place in the upright position and all mounting
hardware is securely tightened. If you ignore this
Warning, you may fall, tip over or lose control of the
wheelchair and seriously injure yourself or others or
damage the wheelchair.

Folding the Backrest

1. Grasp the backrest release cord (see Figure 24) or

backrest release bar (see Figure 25) and pull up.

2. Push the back canes or backrest rigidizer tube

forward toward the front of the chair.

Unfolding the Backrest

1. Lift up on the back canes or backrest rigidizer tube

and pull towards the rear of the chair.

2. Make sure back locks securely into place.

Adjusting the Backrest Lock Bracket

Tools Needed:
• 5/32” Allen Wrench
• 7/16” Open End Wrench

If the backrest will not lock in the unfolded (upright)
position, follow these procedures:

1. Fold the backrest down over the seat.
2. Loosen, but do not remove, the Allen Screw. See

Figure 26.

3. Rotate the latch spacer.
4. Securely tighten the Allen Screw.
5. If the backrest still will not lock securely in the

unfolded position, repeat the procedure on the
opposite side of the chair.

Allen Screw

Latch Spacer

Figure 26
Adjusting the Backrest Lock
Bracket

Figure 25
Adjustable Height & Angle Backrest with Backrest
Release Bar

Figure 24
Adjustable Backrest with Backrest Release Cord

CHAPTER 4:

CHAPTER 4:

CHAPTER 4:

CHAPTER 4:

CHAPTER 4: B

B

B

B

BA

A

A

A

ACKRESTS

CKRESTS

CKRESTS

CKRESTS

CKRESTS,,,,, PUSH HANDLES

PUSH HANDLES

PUSH HANDLES

PUSH HANDLES

PUSH HANDLES

AND STR

AND STR

AND STR

AND STR

AND STROLLER HANDLES

OLLER HANDLES

OLLER HANDLES

OLLER HANDLES

OLLER HANDLES

Backrest Release Bar

Backrest Tube

Back
Canes

Backrest
Rigidizer
Tube

Backrest Cane

Backrest
Rigidizer
Tube

«
...
41
42
43
44
45
...
»

Summary of Contents for Rigid Aero Z Series







































































































Reviews:

No comments

Related manuals for Rigid Aero Z Series

Brand: R82 Pages: 5

Brand: R82 Pages: 4

Brand: Permobil Pages: 26

Airrex LT Self-propelled

Brand: CareCo Pages: 24

Brand: Quickie Pages: 44

Quantum 1121 Series

Brand: Quantum Pages: 2

Power Chairs 600

Brand: Quantum Pages: 2

Brand: Quantum Pages: 2

Brand: Quantum Pages: 24

Brand: Staels Design Pages: 28

Brand: Permobil Pages: 52

Brand: Eagle Health Supplies Pages: 2

8020 Self Propelling

Brand: Karma Pages: 8

Brand: Handicare Pages: 12

Brand: Life & Mobility Pages: 67

Wombat Living 1

Brand: R82 Pages: 145

Brand: Atlantis Pages: 2

Brand: Airwheel Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands