TigerStop TigerSaw 1000, Installation Manual

Page: 32 / 68

29
Run the Home Routine
When TigerStop is powered up, it performs the home routine. The home routine is a 3 step process
where TigerStop will move to its farthest possible location.
1. Power up TigerStop by toggling the power switch on the side of the motor box.
2. Press [Start] when prompted.
3. TigerStop will now display the 3 stages of the home routine.
Note: TigerStop will now move to its farthest possible location. Ensure the deck is clear!
4. When finished, TigerStop will display the Ready Screen.
The Ready Screen is the starting point for all TigerStop functions. Lets take a look at the screen, line
by line.
Line 1 displays the “heartbeat”. The heartbeat is a line that rotates and
lets you know that TigerStop is functioning normally. The letter next to the
heartbeat is the drive indicator. This tells you what the motor is doing.
Line 2 shows the current position of TigerStop. The position will show
with ‘in’ when in inches mode and will show with ‘mm’ when in metric
mode.
Line 3 shows the next position of Tigerstop. This is where user input is
shown.
Line 4 displays the soft key prompts. These prompts tell you what the
soft key button below it does. These can change when you access differ-
ent screens.
Run the Find End Limits Routine
The find limit routine automatically finds the minimum and maximum limits of travel. TigerStop will
move to the home end and will then move to the zero end during this routine.
Table 1: Drive Indicator
H Holding Still W Waiting
A Accelerating X E-Stop Error
C Constant
Speed
N Com. Error
D Decelerating S Stopping