![background image](http://html1.mh-extra.com/html/tiger/jag-b10u/jag-b10u_operating-instructions-manual_1115029026.webp)
26
Problem
Possible Causes
Refer to
Page
Sounds are
generated
When the Start or Keep
Warm key is pressed
Water splashing sound (only when cooking or steaming rice). This
is not a defect.
-
“Click-click” sound. Microcomputer's sound. This is not a defect.
-
“Splash” sound (only when keeping rice warm); generated from
metallic parts being contracted. This is not a defect.
-
A noise quite different from the above is heard. Contact TIGER
customer service/dealer.
27
When cooking timer is
set
The inner pan may not be set correctly.
9
Continuously (beeping)
It is generated if no key is selected 30 seconds after pressing the
Timer key.
-
[E r r] is shown on the LCD display. Unplug the AC cord and
contact TIGER customer service/dealer.
27
Pressing a key
Receives no repsonse
The power cord might be jammed or twisted, or too much dust has
accumulated on the cord.
-
The AC cord might not be plugged to AC outlet correctly.
-
[E r r] is shown on the LCD display. Unplug power cord and contact
TIGER customer service/dealer.
27
Keep warm indicator might be on. Press the Cancel key and try
again.
-
Does not cancel, for the
Cancel key
Press it harder until a “beep” is generated.
7
LCD display is blurry
Rice grain or scorch may stuck on the gasket or brim of the inner
pan.
21
Outer surface of the inner pan might be wet. Dry it with a piece of
cloth or paper towel.
-
Water or rice has entered the rice cooker
body
This problem will cause breakdown. Contact TIGER customer
service/dealer.
27
The power cord does not retract
Check whether the power cord is pulled beyond the colored mark.
-
The power cord might be jammed or twisted, or too much dust has
accumulated on the cord.
-
Resin odor
Smell of newly-used rice cooker; will eventually vanish as using.
-
Stripes or waves looking appear on the
plastic parts
Such stripes or waves are generated when forming resin. They
cause no harm in practical use.
-