Tiger CQE-A11U, Instruction Manual

Page: 8 / 30

13 14
English
5
Cleaning
Unplug the power cord and allow the product to cool down before cleaning.
For detergents, use only those developed for kitchen use (dishes and cooking utensils).
Only use clean soft materials such as cloth or sponge.
P
a
rt
s t
o b
e c
le
a
n
e
d w
h
e
n
e
v
e
r t
h
e
y a
re u
s
e
d
Griddle plate (CQE-A only)
a
If stain is found, place the
plate or deep pan in warm
water (for about one hour).
b
Use a sponge moistened
with detergent diluted with
water or warm water to
clean. Then, rinse with
water.
c
Use a dry cloth to wipe off
water and make them dry.
When cleaning the bottom
of the plate or deep pan for
the first time, there may be
some coating there, so use
a paper napkin etc to wipe
it off.
Caution
● Do not use harmful materials
such as thinner, cleanser,
bleach, metal scrubber, nylon
scrubber, and chemically-
treated wiping cloths.
● Do not put in the dishwasher
or dish dryer, or use boiling
water.
● Do not rub the plate or deep
pan excessively.
Deep pan
Lid
a
Use a sponge moistened
with detergent diluted with
water or warm water to
clean. Then, rinse with
water.
b
Use a dry cloth to dry.
P
la
c
e
s t
o b
e c
le
a
n
e
d
w
h
e
n
e
v
e
r t
h
e
y b
e
c
o
m
e d
ir
ty Main unit
a
Soak a cloth in detergent
diluted with warm water.
Wring the cloth hard and
then use it to wipe the heat
insulating board, plate
heater, and main unit's
exterior.
b
Use a dry cloth to wipe off
water and make them dry.
Caution
● Do not soak the main unit
and power cord in water or
pour water on them.
● Do not rub the seal or printed
area on the main unit with
force.
Power cord Use a dry cloth to wipe.
Any other servicing should be performed by an authorized service representative.
When Check Action
Reference
page
Temperature of the plate
or deep pan does not rise. Is the power cord plugged into
an AC outlet? Firmly insert the plug into an AC
outlet.
11
Is the product connected to a
multi-plug outlet? Use an AC outlet of 15A exclu-
sively for the product.
5•6
Is the temperature control lever
set to "OFF"? Set the temperature control lever
to a temperature appropriate for
the food to cook.
11
Is the plate or deep pan wob-
bling or leaning to one side?
Place the plate or deep pan firmly
into the main unit.
11
Is there any foreign object on the
bottom of plate or deep pan, or
the plate heater? Remove the foreign object.
11
Cooked food is badly
burnt.
Is the surface of the plate or the
deep pan sufficiently cleaned?
Is there any food still left?
Clean them.
13
Has the non-stick coating peeled
off? This may cause burnt food. Even if the non-stick coating has
peeled off, there is no harm to hu-
man body and no problem to the
quality of the product. However,
if you are concerned, contact the
Tiger product retailer where you
purchased the product.
8•15
There is smoke and smell. Have the packing material and
cushioning material been re-
moved? Always remove them before use.
10
When Reason
There are marks (cracks)
in the resin areas of the lid
handle. They are formed during resin molding, and does not pose any problem to the quality
of the product.
Some of the plastic areas
show lines or waves. They are formed during resin molding, and does not pose any problem to the quality
of the product.
Color of plate or deep pan
becomes uneven or discol-
ored. After the product is used for a long time, cooking oil may cause discoloration of the
plate or deep pan, but it does not pose any problem to the quality of the product.
Scratches are found on the
bottom of plate or deep pan. Attaching/removing the plate or deep pan may cause scratches to the coating. This
does not pose any problem to the quality of the product.
The non-stick coating has
peeled off. Food leftover or simply normal use may cause the non-stick coating to peel off. This
does not pose any harm to human body and no problem to the quality of the product.
However, if you are concerned, or if there is deformation or corrosion problem, con-
tact the Tiger product retailer where you purchased the product.
There is smoke and smell. During initial use, there may be smoke or smell of resin, but they'll become less no-
ticeable with use.
During use, the light is on
but the temperature does
not rise. This may be a malfunction. Contact the Tiger product retailer where you purchased
the product for repair.
During use, the light is off. During use, the light may go on or off according to the temperature control.
Check the following before asking for a repair.
6
Troubleshooting
13-14 2013/07/22 17:28:45