Home
/
Tieline
/
TLR5200
/
User Manual

Tieline TLR5200, User Manual, Page: 268 / 359

Share

Page: 268 / 359

Tieline TLR5200 User Manual Download Page 268

268

Genie Distribution User Manual v1.6

© Tieline Pty. Ltd. 2015

2. Click to highlight the

Alarm Severity

level you want to configure.

3. Click

Edit

to configure notification settings.

4. Click

Save

to store the new settings.

SNMP Trap Configuration

Simple  Network  Management  Protocol  (SNMP)  is  a  protocol  used  to  manage  devices  on  IP
networks.  SNMP  provides  the ability  to send  traps  (notifications  or  alerts),  which  are  packets
containing data relating to a system component.  These packets  are generated by  agents  on a
managed  device  and  may  be  either  statistic  or  status  related.  Please  see  your  system
administrator if you require more information.

1. Click to select the

Send SNMP trap

check-box.

2. Enter the SNMP trap target in the text box, then click

Save

to store the new settings

.

«
...
266
267
268
269
270
...
»

Summary of Contents for TLR5200








































































































































































































































































































































































Reviews:

No comments