249
© Tieline Pty. Ltd. 2015
Genie Distribution User Manual v1.6
Important Notes:
·
POTS Answer Config
settings are applied to
POTS Codec
connections and not
Analog Phone
connections.
·
When receiving a call from a Tieline codec with session data enabled (i.e. not
Sessionless
), the algorithm setting from the dialing codec overrides the setting in the
POTS Answer Config
menu.
POTS Config Settings
The default
POTS Answer
module
Config
settings, which can be viewed in the
POTS Answer
panel
are:
·
Tieline Codecs
Session Data,
·
The
Other
algorithm.
This configuration will accept the settings from an incoming Tieline codec when it dials with
session data enabled. It will also allow the codec to answer a call from a Comrex POTS codec
supporting the
Other
algorithm setting.
Answering Calls from Non-Tieline POTS Codecs
1. Click the
Edit
button to configure settings.
2. Select the
Sessionless Only
check-box when only non-Tieline codecs are dialing a Tieline codec
over POTS. This allows you to choose the default encoding setting and
Route
the incoming call
to a nominated audio stream via a corresponding
Answer Route
in the answering codec program
if required.