81
Prior to wheel installation, you
should clean up the rust on the
wheel surface through iron brush.
During the process of wheel
installation, in the event that no
appropriate real metal is connected
with metal on the installation
surface, the bolt may loosen and
wheel
may
fall
off
during
automobile running process, thus
you should check if binding bolt
loosens after running for1600km.
8.Installation of wheel clamp nuts
To install wheel clamp nuts (with
cone face towards the inside) and
screw down the nuts through hand.
While fixing the nut, hub nuts’ cone
face should contact with the cone
face of wheel installation hole.
After screwing down the nuts, you
should push the wheel along
external/internal directions, in order
to check if clamp nuts can be further
screwed down.
9.Lowering to original height
To turn the jack handle along
counter-clockwise
direction,
in
order to lower the automobile to
Aluminum
wheel
Steel wheel
82
