75
the engine rotate at 2000 r/m speed.
5.To start the vehicle equipped with
accumulator and slightly depress he
accelerator pedal after starting the
engine, in order to make engine run
at 2000 r/m speed for several
minutes.
6.To disconnect lapping wire
according to the reverse order of
wire connection.
In the event that there is no
remarkable
reasons
for
accumulation discharging (such as
light on), you should immediately
call
Designated workshop.
For
overhaul.
ü
ü
ü
üü
ü
ü
ü
In case your engine
shuts down during your
driving
You should make the following
countermeasures in the event of
engine
kill
during
running
process:
1.To stably reduce the speed and
maintain linear running, and then to
park the vehicle at a safe place.
2.To turn on the hazard warning
signal lamp
3.To attempt to restart the
engine.
In the event of engine start failure,
you should refer to relevant
contents
in
Chapter
IV
“Automobile start failure”.
Warning
In the event that the engine
stops running, the strengthener in
brake system will temporarily
lose efficacy. In this case, brake
is more difficult than in ordinary
condition.
ü
ü
ü
üü
ü
ü
ü
In case your engine
overheats
In the event that engine coolant
temperature
meter
displays
overheating of engine or engine
power
is
lost
according
to
experience or there are piston knock
& pinging noise, the engine may be
overheated, and you should take the
following countermeasures:
1.To stably park the vehicle at a safe
place, open hazard warning signal
lamp, place gear at neutral gear, and
tightly pull hand brake, in addition
to turning off air conditioner.
2.In the event that coolant or steam
are spurted from radiator or storage
tank, you should park the vehicle
and open the vehicle cover if there
is no steam. In the event of no
coolant or steam, you should
maintain engine’s normal running
on the precondition of cooling fan’s
76
