107
In addition, do not install tire tube to
the leaked wheel without tire tube
for continual use.
After the automobile runs for the
first 1600km, please check if the
wheel nuts are loosened.
In the event of adjusting,
repairing and replacing tire, please
check if the wheel nuts are loosened
after the automobile runs for the
1600km.
Please select the special nuts for
Designated workshop’s wheel as
well as the special wrench designed
for aluminum wheel.
In the event of dynamic balance,
please make use of the special
balance weight. In work, please use
plastic or rubber hammer.
Please periodically check if the
aluminum wheel has been damaged,
please replace it in the event of
being damaged.
●Aviod fierce step on brake
causing wheel lock.tire chains will
bring bad influences to automobile
operation.
In the event that the wheel suffers
distortion, crack, or severe
corrosion, the wheel shall be
replaced.
If the damaged wheel was not
replaced duly, the outer cover may
fall off the wheel or the steering
may be out of control.
While replacing the wheel, please
ensure that the new wheel has the
Replacing wheels
Precautions for use of
aluminum wheels
Time for wheel replacement
Selection to wheel
same bearing capacity, model, rim
width, and offset as original one.
Please call
Designated workshop
for the correct wheel installation
method.
In the event that the wheel size and
model are different, the following
factors will be influenced, such as
maneuverability, service life of
wheel and bearing, cooling of the
brake, alignment of the speed meter
/odometer,
braking
capacity,
lighting distance of the front lamp,
the height of the shock absorber,
automobile’s ground clearance, and
the clearance between the tire and
the body or the chassis.
While replacing the wheel, please
do not use the second-hand wheel
because the second-hand one lacks
safety guarantee. If the distorted
wheel has been repaired in surface,
it cannot be used again because its
internal structure has been damaged.
108
