79
3.To dismantle wheel decoration
cover
According to figure below, you
should insert one terminal of
dismantling tool into little holes
near aluminum decoration cover for
opening the cover. As to steel wheel
decoration cover, you should
leverage the inclined terminal of
wheel wrench to open the cover.
Warning
Do not attempt to open the
wheel decoration cover by hands
and the force should be moderate
while opening the decoration
cover, in order to guard against
injury.
4.To loosen wheel nuts
Wheel nuts should be loosened
before the automobile has been
hoisted.
To loosen the nuts, wrench should
be turned along counter-clockwise
direction. To save labor, you should
grab wrench handle terminal to
raise the wrench upwards according
to figure below, and you should
prevent the wrench from sliding
from nuts.
Do not directly dismantle nuts and it
is enough to loosen nuts to half and
one circle.
5.Jack placement
According to figure above, four
jack support points at the bottom of
automobile
body
are
equally
distributed on both sides.
Jack should be placed at the nearest
steel wheel
80
