42
each above-mentioned mode, if
there is no operation of this button
within 5s, the system automatically
exits this mode.
12.Lout playback
Press this button to enter into
loud playback mode and press again
to cancel loud playback mode.
13.Time display button
Press this button to display the
time. When pressing and holding
this button for 2s, the hour digit will
flash. In such case, rotate the
encoder to adjust the hour. When
pressing the CLK button again, the
minute digit will flash. In such case,
rotate the encoder to adjust the
minute. At finish of adjustment,
wait for 5s to complete the time
setup.
14.Preset button 1/Pause/play
button
Select radio station
Select the band and then press this
button to listen the radio station
saved in this button. In such case,
the display screen will display the
band, frequency and the present
number.
Save radio station
Select the band (such as FM1) and
then tune to the desired radio
frequency by pressing the automatic
or manual scan button. Press and
hold this button (for more than 2s).
When the display screen displays
the number “1” (present button
number), the radio station is saved
in this button. The screen will
display corresponding number for
other preset buttons. In addition,
when new radio station is saved, the
old radio station saved in this button
is superseded.
Pause/play
Under SD card playback mode,
press this button to pause the
playing track. In such case, the
screen will display “PAUSE”. Press
again to resume the playing of
current track.
15.Preset button 2/Scan play button
Select/save radio station
Refer to the procedure of radio
station selection/save for preset
button 1.
Browse play
Under the SD card playback mode,
press this button to scan play all
tracks, with 10s for each track. In
such case, the screen will display
“SCN”. Press this button again to
42
