82
original height.
You should leverage hub wrench to
turn clamp nuts along clockwise
direction through hands instead of
hammer and turn wrench by means
of lengthening casing pipe or pedal,
with wrench being reliably knotted
on nuts.
Each nut should be screwed down
for several times, and the screw
order is shown in figure below.
Warning
To prevent operator or other
persons from being injured
during the process of lowering to
original height.
10.Re-installation
of
wheel
decoration cover
1)To align the previous place of the
wheel decoration cover. As to steel
wheel, to align the positioning
initial cuts on decoration cover and
rim section.
2)To knock on decoration cover by
fist or palm to the original place.
Warning
The
force
should
be
appropriate
while
installing
wheel decoration cover, in order
to guard against injury.
11.Examination of new tire’s
pressure
To regulate tire pressure to the
designated scope in Chapter VIII. In
the event that tire pressure is too
low, to drive the automobile at low
speed to the neighboring repair
station, in order to supplement the
gas to standard scope.
Do not forget to install valve cover
after
regulating
the
pressure,
otherwise dirty articles or steam
will enter the valve core and result
in leakage. In the event of valve
cover loss, please purchase a new
one as soon as possible.
83
