102
condition, and the coolant level
shall stay between the upper limit
and lower limit. In the event of the
coolant level is too low, please fill
glycol coolant, and such kind of
coolant can prevent the aluminum
products in the automobile from
being corroded.
The coolant level will alter with the
engine temperature, and when the
fluid level stays below or is slightly
higher than the lower limit, please
fill the coolant until the level is
close to the upper limit.
In the wake of filling the coolant,
the fluid level lowers in short time,
implying that leakage exists in the
system. Now, please check the
radiator,
hose,
coolant
filter,
radiator cap, drain valve and water
pump
If users fail to find the leakage,
please call
Designated workshop
to
examine the pressure of the radiator
cap or the entire cooling system.
Warning
Do not open the radiator cap
when the engine temperature is
relatively high, in order to
prevent being scalded.
Selection to the coolant
The inappropriate coolant will lead
to the damage to the engine’s
cooling system, but the glycol
coolant can protect the engine’s
aluminum parts. Apart from frost
resistance, the coolant can prevent
the engine from being damaged and
corroded. Users should not use
redundant inhibitor and additives.
Please carefully read the instruction
on the coolant vessel, and strictly
abide by the
User Manual
to mix
certain proportion of water (purified
water or distilled water). Please
refer to Chapter VIII for the
capacity of the cooling system.
Users should use 50% solution,
with minimum work temperature
-35
. In cold region, users can use
60% solution, with the minimum
temperature hitting -50
. Do not
use more than 70% coolant for
achieving better cooling effect.
Notice
Do not use ethanol coolant or
only use the water.
ü
ü
ü
üü
ü
ü
ü
Checking tire pressure
The tire pressure shall comply with
the standard.
Please refer to Chapter VIII for the
tire pressure and model
The tire pressure shall be examined
once every two weeks; do not forget
103
