THUNDER LASER
MINI-60
www.thunderlaser.com
THUNDERLASER TECH CO., LTD
Tel :(86)755 82689501
66
5.2.2
Cleaning the Mirrors
There are three mirrors in the operating area of the laser, which may have to be cleaned if
they are soiled. To clean the reflector, follow the instructions below.
The Mirror#1
The mirrors are easily get dirty. And this will reduce the efficiency of the laser beam.
Meanwhile, laser energy absorbed by the mirror may cause heat and destroy the mirrors
too. For the first mirror, you can clean them directly.
The Mirror#2
Make sure the power of the laser machine is turned off while cleaning. The 2
nd
mirror is
installed on the left side of X rail. For the second mirror, you can clean them directly.
The Mirror#3
Cautions:
1) Mirrors must be cleaned carefully by using lens cleaning paper/lens cleaning cloth to
avoid scratching the surface.
2) Do not touch the surface of the mirrors/lens after cleaning
3) The concave side of the lens must be on the bottom when installed
