THUNDER LASER
MINI-60
www.thunderlaser.com
THUNDERLASER TECH CO., LTD
Tel :(86)755 82689501
58
8. Please check the water cooling system is working properly; the water is running into
and filling the laser tube. Please do not start your work if the laser tube is
n’t full of
water, because that may led to laser tube damage due to the high temperature.
9. Finally
press the “Start-Pause” button in the display, to start the engraving process.
10. While the laser is engraving, you can generate the next graphic.
11. When the engraving is complete, the laser machine will give out the notification
sound and the laser head will go back to the original point, and the warning light will
return to the green light, then you can repeat engraving.
