THUNDER LASER
MINI-60
www.thunderlaser.com
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
Tel :(86)769 82665376
23
3.5 Exhaust System
– Requirements
To guarantee the right ventilation during the engraving and the cutting. The device must
be equipped with a fine exhaust fan(generation of rubber dust), if you use an carbon filter
(neutralization of smells) will be better for exhaust effect. A good exhaust fan of the
outgoing air is also required when cutting plastics or engraving wood.
Connection - see section 3.7.3 connecting the Exhaust System.
Do not start the machine without an adequate exhaust system.
3.6 Air system
– Requirements
To guarantee do not catch file and too much smoke during the engraving and the
cutting. The device must be connecting with the laser to make sure the laser is safe
during the work.
