THUNDER LASER
MINI-60
www.thunderlaser.com
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
Tel :(86)769 82665376
27
3.8.3 Connecting the Exhaust System
Installation of the exhaust transposition. Insert one side of the gray exhaust pipe into the
fan inlet and the other side into the fuselage behind the exhaust tank. Insert one side of
the blue exhaust pipe into the fan outlet and put the other side of the pipe outside where
you work (If the machine is far from the outside of the room that the gas manufactured by
the machine cannot be discharged; then you might need an dust/fume filter, it can keep
the air quality of your working environment well).
Please refer to the following pictures about how to install the exhaust pipe:
Also follow the operation and maintenance instructions in the Operation Manual of the
exhaust system.
The input voltage must correspond (AC 220 V/50 Hz or AC 110 V/60 Hz)
– see information
label beside the connection socket.
