THUNDER LASER
MINI-60
www.thunderlaser.com
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
Tel :(86)769 82665376
17
Chapter 3 Process of Installing
3.1
Unpacking
You receive your THUNDER LASER MINI-60 packed in a wooden box, which contains the
laser machine and additional accessories. The following steps give you an overview of the
unpacking and assembly of the laser. Please follow these steps carefully.
Tips
: Keep the packing box. You will require it in case of a return.
Dispose all waste according to the applicable waste disposal law.
1.
Put the wooden box on a flat and spacious room for unpacking.
2.
Remove the machine box, carefully remove the foam material, which protects the
viewing window of the cover and around the machine.
3.
Take out the key
，
open the door of the laser
，
Remove the accessories box which
contains all accessory parts required for the installation of the laser machine.
And
check if there’s anything damaged or missed during shipping.
4.
You will see an attachment table on the machine; please check whether the
accessories that listed on the table are all in there.
5.
Please keep the keys and the warranty certificate well (and please show us your
warranty certificate if you need tech support for the machine failure, then we will provide
you the best technical service).
6.
Remove the sponge and nylon cable ties inside the machine,
and start to install the
machine (below chapters are installation details)
