THUNDER LASER
MINI-60
www.thunderlaser.com
THUNDERLASER TECH CO., LTD
Tel :(86)755 82689501
59
4.8 Rotary Axis Attachment
The rotary axis attachment option in the printer driver is used in combination of the rotary
axis attachment, to engrave cylindrical objects. To compensate for the different diameters
of different objects, the image must be adjusted. This is performed automatically by the
engraving driver, by selecting the rotary engraving option and entering the diameter of the
object to be engraved.
The Rotary size:
To install and set-up the rotary axis attachment proceed as described as follows:
1. Move the working table to the lower position switch off the laser and open the top lid.
2. Put the rotary axis attachment onto the working table and connect the rotary axis
attachment to the working table. Before you fix the rotary axis attachment, align it so
that its sides are parallel to the rulers. The rulers offer a visual aid for placing the
graphic.
3. Connect the rotary axis attachment via the control cable with the connector of the
motion system. The connector is located inside the right front of the laser.
Connected
it to this interface and fixed,
then turn on the switch and reset the rotary device by
press the “reset” button on the display
, and then you have finished the device
connection. Like below:
