THUNDER LASER
MINI-60
www.thunderlaser.com
DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD
Tel :(86)769 82665376
33
5. X-axis
The motion system is that performs the mechanical movements in X direction. The
X-axis is visible in the working area.
6. Laser head
The laser and red dot pointer comes out from the laser head, and the Auto Focus
switch is installed on the laser head, too. The bottom of laser head is parallel to the
bottom of the autofocus switch.
7. Working table
The honey comb plate to be processed is put onto the working table. Put the material
on the working table for engraving & cutting
8. Flap protection sensor
This is where Open flat protection exist. Laser will stop working once the cover has
been opened.
9. The Warning light
The light will turning red while laser working, and it’ll turning green when laser stop
working.
10. The rotate emergency switches
Once there’s an accident happen (laser catch fire, laser out leakage) during working,
please turn off this switch immediately.
11. The display
You can control the X-axis, Y-axis and Z-axis manually by the display panel, it also
shows the working time, power, speed and the whole working time and affords many
function options(please view this chapter 4.3 for detail).
12. Left-up side door
Open this door for cleaning the second reflective mirror
13. Left side door
There is laser power supplier, Ammeter, TL-Timer, filter etc. please open this door for
checking these parts, but must pay attention to the electric current.
14. Front door
Open this door for cleaning the waste after working.
15. Y-axis
The motion system is that performs the mechanical movements in Y direction. The
Y-axis is visible in the working area.
16. Connection Socket for Rotary Attachment(option)
Supplies the rotary attachment with the required electric signals.
