Installation - TT-3022D
Installation - TT-3022D
Installation - TT-3022D
Installation - TT-3022D
Connectors
Connectors
Connectors
Connectors
Page
Page
Page
Page 2-10
2-10
2-10
2-10
25Jul00
25Jul00
25Jul00
25Jul00
2.5.2
DTE Communication port
The TT-3022D Capsat Transceiver communicates with a controller
device via the standard EIA/TIA-232E ports on a female 9 pole
Sub-D connector, located on the rear panel at X3.
2.5.2.1
Baudrate and protocol settings
The TT-3022D accepts the following:
Baud rates
Baud rates
Baud rates
Baud rates
Protocol settings
Protocol settings
Protocol settings
Protocol settings
Handshake
Handshake
Handshake
Handshake
110 Baud
7/8 databits
Hardware
150 Baud
No/Even/Odd parity
Using DTR and CTS
300 Baud
1/2 stopbits
600 Baud
Software
1200 Baud
Using XON and XOFF
2400 Baud
4800 Baud
9600 Baud
19200 Baud
38400 Baud
Table 7 Automatic baudrate settings
The serial port communication parameters are factory pro-
grammed to:
4800 Baud, 8 databits, no parity, 1 stopbit
4800 Baud, 8 databits, no parity, 1 stopbit
4800 Baud, 8 databits, no parity, 1 stopbit
4800 Baud, 8 databits, no parity, 1 stopbit
Please see section 4.2.2 to alter baudrate and protocol settings.
2.5.2.2
DTE Connector interface
The TT-3022D which is a DCE uses the signals listed in Table 8
(marked with a
9
in the
Used
column). Please notice that DTE pin
naming is used.
