TT-3042D Remote Alarm / Printer Unit
TT-3042D Remote Alarm / Printer Unit
TT-3042D Remote Alarm / Printer Unit
TT-3042D Remote Alarm / Printer Unit
System Installation
System Installation
System Installation
System Installation
25Jul00
25Jul00
25Jul00
25Jul00
Page
Page
Page
Page 3-59
3-59
3-59
3-59
3.10.2
Installation
To following brief outline may be used to get the TT-3042D up
and running as a printer together with a Thrane & Thrane trans-
ceiver which supports Arcnet - hardware as well as software wise.
1.
Set an unique Arcnet address as described in section 3.10.1.
2.
Connect the 3042D to the transceiver by means of the accom-
panying interconnection cable (15 pole SubD connectors).
3.
Connect the 3042D to a DC power source by means of the ac-
companying power cable. For security reasons take care to
connect the ground/chassis wire properly to ground.
When power is applied it should now be possible for the trans-
ceiver to print on the TT-3042D when needed or initiated by the
user.
3.10.3
Connectors
The connectors for the TT-3042D are placed on the rear panel of
the printer unit.
3.10.3.1
X1 Power In
The pinout of the power supply input is as listed in Table 36.
Pin
Function
1
Battery Positive
2
Battery Negative
3
Ground
4
Remote turn-on
Table 36 TT-3042D Power Connector
