System Generation
System Generation
System Generation
System Generation
Initialise System Parameters
Initialise System Parameters
Initialise System Parameters
Initialise System Parameters
Page
Page
Page
Page 4-2
4-2
4-2
4-2
25Jul00
25Jul00
25Jul00
25Jul00
OPTIONS - CONFIGURATION - TERMINAL
4.1.3
Computerised equipment/handheld
terminals
Your computer/terminal should display the ASCII characters as
they appear being send from the TT-3022D Capsat Transceiver.
No alphabet or protocol conversion should take place.
4.2
Initialise System Parameters
The System Parameters are initialised using the 'set -b' command.
After issuing this command a menu appears with a number of ini-
tialisation options.
:set - b<CR>
Init system parameters menu
0 Quit
1 All
2 Basic system parameters
3 EGC Network ID's
4 Data Network ID's
5 LES Network Table
6 Link Test Results
Enter number >
4.2.1
Entering your mobile number
If a TT-3606C terminal is connected to the transceiver please re-
fer to section 4.4.4.
The Mobile Number in the Transceiver is entered using the 'set -u'
command.
:set -u ?<CR>
