Connectors
Connectors
Connectors
Connectors
Installation - TT-3022D
Installation - TT-3022D
Installation - TT-3022D
Installation - TT-3022D
25Jul00
25Jul00
25Jul00
25Jul00
Page
Page
Page
Page 2-9
2-9
2-9
2-9
input)
6
ON/OFF
Remote ON/OFF1
White 0.25mm2
7,8
SGND
Chassis (Secondary
GND)
Yellow/green
0.55 mm
2
11
NC
14,15
9V out
Fl9V out max
400mA on pin 14 & 15.
Ref. to Chassis
(Secondary GND)
Note: Max. load (400mA)
is a combination of this
output and X4 pin 5.
Red wire with Red
connector
Secondary GND
Yellow/green
wire with
Transparent
connector
Ground
GND
Ground shield
Table 6 TT-3022D Capsat Transceiver DC Power Connector pin
assignment
Pin 6 is a unique feature for the TT-3022D Capsat Transceiver.
When this pin is left floating the Transceiver is turned off, but if
pin 6 is shorted to the negative terminal of the battery or DC-
supply, the Transceiver will be switched on. This makes it possi-
ble for external equipment to perform remote power control of
the TT-3022D.
The remote power control can be controlled by an external relay
or solid state switch.
The battery connection input is floating, i.e. there is no galvanic
connection from any of the battery poles to the cabinet frame.
1 This wire has to be connected to battery negative (black wire), to be
able to turn on. Please see section 2.4.1, On/Off features.
