Thrane&Thrane Capsat TT-3060A, User Manual

Page: 43 / 182

Call Types
12Oct01
Page 4-7
V
V V
V
OICE OICE OICE OICE
C
C C
C
ALLS ALLS ALLS ALLS
Telephone calls can only be made or received if
•
Bulletin Board has been received from NCS
e.g. the display shows 'IOR:PTT TELE'.
• Capsat® Telephone is in synchronisation with NCS,
i.e. the green sync indicator lights steadily
R R R R
ECEIVING
ECEIVING ECEIVING
ECEIVING
H H H H
ANDSET
ANDSET ANDSET
ANDSET
C C C C
ALLS
ALLS ALLS
ALLS
In the following an incoming call to the handset is described. The
handset will ring and the yellow RING indicator will flash. The call can
be answered in two ways:
1.
Press the , -key
This will establish the connection and enable the microphone and
ear-piece. If the handset is in the cradle the speaker in the terminal
will also be enabled. The RING indicator lights steadily during the
connection.
2. Lift handset out of the cradle
This will establish the connection and enable the microphone and
ear-piece. The RING indicator lights steadily during the
connection.
During the call you can use the volume control at the side of the
handset to control the speech level. The
-key combination
enables/disables the speaker in the terminal. The D -symbol shows
whether the speaker is On/Off. To mute the microphone press .
When muted the Off-hook indicator will flash in the display.
Calls are cleared in two ways.
1. Pressing the
,
-key.
2. Place the handset in the cradle when the speaker is Off ( i.e. the D
indicator is off).