Thrane&Thrane Capsat TT-3060A, User Manual, Page: 90 / 182

Menu System
Page 5-26
12Oct01
PhBook Dial
This menu item makes it possible to disable/enable mandatory dial of
numbers from the phone book.
When enabled the user will only be allowed to make calls from
numbers in the phone book, therefore only short-codes can be used
when making calls from an auxiliary telephone, a connected fax or the
DCE port.
The options are:
• Disabled
•
Enabled for terminal only (MES Only)
• Enabled for both terminal and SIM cards (MES/SIM).
Protected by CONFIG PIN.
NOTE: It is possible to update the phone book on a SIM card from
another terminal where either the feature is disabled or not
implemented. Therefore this feature is only safe for MES Only mode.
Auto Prefix
This menu item is used to define a prefix number to be automatically
set in front of all dialled numbers. It is only possible to dial numbers
starting with this prefix number.
This menu also contains an entry where it can be specified that one
leading zero from the dialled number shall be ignored.
Example: If the prefix number is defined as 004539558 then it is only
possible to dial numbers at Thrane & Thrane. Following
key sequence will dial the switch board at Thrane&Thrane
, which full number is 004539558800.
Example: If the prefix number is defined as 0045 and The ‘Ign. Lead
0’ option is enabled, then it is only possible to dial
numbers in Denmark and a leading zero will be removed.
Following two key sequences will both dial the switch
board at Thrane&Thrane:
and
which full number
is 004539558800. The leading zero from the second key