Thrane&Thrane Capsat TT-3060A, User Manual

Page: 106 / 182

Menu System
Page 5-42
12Oct01
A new spot beam selection is initiated to find a spot with a stronger
signal, e.g. if the current spot starts failing (many fax and data calls
errors) or the C/No is low.
It is primarily in the perimeter of a spot beam that the signal strength
can vary.
Automatic spot beam selection is performed:
a)
When terminal is powered on.
b) When a new Area/Ocean Region is selected.
c) With 8 hour intervals if the terminal is in listen or sleep mode.
T TT T
EL EL EL EL
. N . N . N . N
UMBERS UMBERS UMBERS UMBERS
The 9-digit International Mobile Numbers (IMN) of the terminal itself
can be entered for later reference using this menu. The menu has 4
entries: Handset, Fax, Data and Aux. The number associated with each
entry can be displayed by changing from ABC mode with
-key.
The numbers are pre-set to “000000000” from factory. It is up to the
service provider or user to enter the correct numbers.
To enter a number select an entry using the and keys and
press . The displayed number can now be edited using the
-key and the number keys on the handset. After editing press .
This will display the associated text field. It is now possible to either
edit the text field and/or accept it by pressing
. The entry is then
saved.
If a SIM card is inserted the numbers associated with the SIM card are
displayed instead. It is not possible to edit the entries.