Thrane&Thrane Capsat TT-3060A, User Manual, Page: 79 / 182

Menu System
12Oct01
Page 5-15
Table Table Table Table 8888 Capsat® Telephone Security Key Overview. Capsat® Telephone Security Key Overview. Capsat® Telephone Security Key Overview. Capsat® Telephone Security Key Overview.
PIN 2 CONFIG TT-Special
ALLOWED LES X
STD. ALLOW LES X
PIN 2 X
HELP DESK X
1
PIN CONFIG X
ROUTE IDs X
ALLOWED DIAL X
PH BOOK DIAL X
AUTO PREFIX X
BAR SERVICE X
SIM LOCK X 2
STU ENABLE X 3
Before updating PIN codes it is necessary to enter the old PIN code
and then enter the new PIN code twice before the result message is
displayed. The messages are:
< < < < PINxx > > > > - updated - updated - updated - updated The PIN code <PINxx> was
successfully updated.
PIN code PIN code PIN code PIN code - too short - too short - too short - too short The new PIN code is too short.
PIN codes
PIN codes PIN codes
PIN codes - mismatch
- mismatch - mismatch
- mismatch The two entries of the new PIN code
were not identical.
PIN update
PIN update PIN update
PIN update - failed
- failed - failed
- failed The old PIN code was incorrect.
PIN1 PIN1 PIN1 PIN1 - not enabled - not enabled - not enabled - not enabled PIN1 must be enabled before the PIN1
string can be modified.
1 Can only be modified with MES PIN2.
2 To change this field the SIM lock security key must be entered. SIM
lock mode can also be entered with at start-up in an illegal
mode (e.g. when configured to SIM-ONLY mode and the SIM card is
absent at start-up).
3 To enable the STU facility the STU security key must be entered.