Thrane&Thrane Capsat TT-3060A, User Manual

Page: 101 / 182

Menu System
12Oct01
Page 5-37
• Heat alarm
Specifies whether a heat alarm is present (On) or not (Off). Switch
Off the power of the Capsat® Telephone and wait until the
FrontEnd is cold before turning On the power. If the alarm is still
present contact your agent.
• Burst alarm (On/Off)
Specifies whether a burst alarm is present (On) or not (Off). Burst
alarm means that the FrontEnd has registered a carrier when
sending in burst mode for more than 250 ms. If the problem comes
again contact your agent.
• Power alarm (On/Off)
Specifies whether a power alarm is present (On) or not (Off).
Switch Off the power of the Capsat® Telephone and wait until the
FrontEnd is cold before turning On the power. If the alarm is still
present contact your agent.
Platform Platform Platform Platform (only Capsat® Compact Carphone, Capsat® Disc and
Maritime Telephones)
• Platform ID
Contains the Platform types:
- OmniPless Land Mobile
- OmniPless Maritime
- KVH Land Mobile
- KVH Maritime.
• Version
Contains the version number of the Platform.
• State
Contains the state of the Platform:
- Reset (Platform making initialisation and self test).
- Ready (Platform is idle and ready for new commands).
- Error (Platform has detected a software error which is reported
as an alarm to the handset. See also the alarm log section below).
- Sky Scan (Platform searching the sky for a channel).
- Step track. (Platform is optimising the azimuth/elevation angle
based on Carrier/Noise measurements).