Portable Optical Tweezers Kit
Chapter 5: Setup and Adjustment
Page 42
MTN024417-D02
Connect the two pieces of the
sample holder using two 8-32",
3/8" long (M4 x 10) mm screws
with washers.
Screw the adapter assembly to
the stage using two 1/4"-20,
0.315" long (M6 x 8 mm) cap
screws with washers and 4
dowel pins (you may need to
use the screws to pull the
stages together once you have
aligned the dowel pins).
Now, attach the assembled stage on the breadboard at the position depicted in Figure 10
using four 1/4"-20, 3/8" long (M6 x 10 mm) cap screws with washers.
Summary of Contents for EDU-OT3
Page 1: ...EDU OT3 EDU OT3 M Portable Optical Tweezers User Guide...
Page 93: ......
Page 94: ...www thorlabs com...
