123
When waxing, ALWAYS use an automotive grade nonabrasive wax and cleaner. Use
EXTREME care when waxing your vehicle and ALWAYS rub in horizontal motions.
DO NOT use a pressure washer.
It is strongly recommended that you DO NOT use a rotating brush car wash as it can
lift
the ends of your vinyl graphic or scratch your paint finish.
DO NOT use alcohol, strong solvents, bug remover, or tar remover on your painted or
vinyl surface as it may leave a foggy appearance in that area.
Note:
If using a tar and/or insect remover is absolutely necessary, insure it
is safe for painted surfaces and decals.
Minimize any fuel contact with your paint finish or vinyl graphics. Prolonged contact
can damage the finish.
Power buffers ARE NOT recommended.
• Avoid parking under trees or near ocean salt spray.
• Ice or snow should not be scraped from the painted surface. Brush off.
• If the vehicle sits more than 24 hours, remove any front protective
covering (bra) while not being driven.
• Commercial washes should be avoided. Wash with cold water using a
mild liquid soap. Dry wiping with a dry cloth is not recommended.
• When driving, avoid gravel roads.
• Anti-freeze, gasoline, or window solvent spilled on painted surfaces
should be rinsed off with water immediately.
• Rinse off bugs and bird droppings daily with water.
Any exterior finish will deteriorate with time. Dulling and
fading can be increased by prolonged exposure to extreme sunlight, air pollutants,
and excessive moisture. Surface weathering of fiberglass will not diminish structural
integrity. Regular monthly washing and polishing of exterior surfaces is the best
insurance against surface deterioration such as fading, yellowing, or chalking. Take
care to avoid spraying water directly into refrigerator and furnace vents when washing
the motorhome.
If surface deterioration is apparent, contact a Thor Motor Coach dealer for assistance
with finish restoration. Physical damage to the fiberglass, such as cracks, holes, and
chips, must be attended to immediately to avoid moisture from entering and causing
problems with interior walls and components. Cover these areas with plastic, sealing
the edges with tape until proper repairs can be made.
Clean and wax all trim extrusions when waxing the recreational vehicle sidewalls,
to help avoid surface pitting. Special aluminum cleaners are available to restore the
original luster to aluminum surfaces. Make sure to follow the instructions for use as
outlined on the product package.
Inspect the roof components at least twice a year to make sure that all the seals are
not cracked or worn. Proper maintenance of seals is necessary to keep moisture from
entering and causing severe damage such as rot, mold, or mildew. If you encounter
drying, cracked, or weathered seals, make sure to reseal as necessary. Remove the
old worn seals first before reapplying the new seals. Check with your dealer for the
Care and Maintenance
Precautionary
Measures
CAUTION
EXTRUSIONS
AND ALUMINUM
SURFACES
Do not use petroleum solvents, harsh abrasives, or citric
based cleaners.
ROOF
Summary of Contents for Palazzo 2015
