THOMSON SpeedTouch 510v5, Reference Manual

Page: 358 / 384

Systemlog Commands
E-DOC-CTC-20040907-0010 v1.0
356
systemlog send
Send syslog messages from the internal SpeedTouch
TM
Syslog message buffer to a specified local or remote
syslog server host.
SYNTAX:
where:
There will be no notification on whether the host has received the messages or not.
systemlog send [fac = <supported facility name>]
[sev = <supported severity name>]
[hist = <{no | yes}>]
dest = <ip-address>
fac Specify the facility name of the syslog messages to be shown.
Use one of the supported facility names (see
“ Supported Syslog Facilities” on page 379 ).
Note
If not specified, the messages of all the facilities will be shown.
OPTIONAL
sev Specify the lowest priority severity of the syslog messages to be shown.
Only the messages with a severity as specified or higher will be shown.
Use one of the supported severity names (see
“ Supported Syslog Severities” on
page 380 ).
Note
If not specified, the messages of all the facilities will be shown.
OPTIONAL
hist Show messages over several SpeedTouch
TM
reboots (yes) or show only messages since
latest startup (no).
Note
If not specified, only the recent messages will be shown.
OPTIONAL
dest The IP address of the remote host on the local or remote network, i.e. the collector's IP
address, to send the syslog messages to. REQUIRED