THOMSON SpeedTouch 510v5, Reference Manual

Page: 175 / 384

IP Commands
E-DOC-CTC-20040907-0010 v1.0
173
IP Commands
Introduction
This chapter describes the commands of the
ip
command group.
Contents
This chapter covers the following commands:
ip apadd Assign an IP address to an IP interface. 174
ip apdelete Remove an IP address from an IP interface. 176
ip aplist Show a list of all configured IP addresses. 177
ip arpadd Add an entry to the ARP cache of a broadcast IP interface. 178
ip arpdelete Remove an entry from the ARP cache. 179
ip arplist Show the ARP cache. 180
ip config Show/set global IP stack configuration options. 181
ip flush Flush the complete IP configuration. 184
ip ifconfig Configure IP interface parameters. 185
ip iflist Show all IP interfaces. 186
ip ifwait Wait for a status change of an IP interface. 187
ip mcadd Add an MC address to an MC capable interface. 188
ip mcdelete Delete an MC address to an MC capable interface. 189
ip mclist List all MC addresses. 190
ip ping Send ICMP ECHO_REQUEST packets. 191
ip rtadd Add a route to the SpeedTouchTM routing table. 192
ip rtdelete Delete a route from the routing table. 193
ip rtlist Show the current routing table. 194
ip sendto Send UDP packets. 195
ip traceroute Send ICMP/UDP packets to trace the ip path. 196
ip auto flush Flush the autoIP interfaces. 198
ip auto ifadd Create a new autoIP interface. 199
ip auto ifattach Select and assign a link-local address to an autoIP interface. 200
ip auto ifconfig Configure an autoIP interface. 201
ip auto ifdelete Delete an existing autoIP interface. 202
ip auto ifdetach Release the link-local address for the given autoIP interface. 203
ip auto iflist Show the autoIP interfaces. 204