THOMSON SpeedTouch 510v5, Reference Manual

Page: 195 / 384

IP Commands
E-DOC-CTC-20040907-0010 v1.0
193
ip rtdelete
Delete a route from the routing table.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
ip rtdelete dst = <ip-address>
[dstmsk = <ip-mask(dotted or cidr)>]
[label = <string>]
[gateway = <ip-address>]
[intf = <string>]
dst The destination IP address(es) for this route.
Supports cidr notation. REQUIRED
dstmsk The destination IP address mask. OPTIONAL
label The name of the label. OPTIONAL
gateway The IP address of the next hop. Must be directly connected.
Note
The parameters gateway and intf are mutually exclusive.
OPTIONAL
intf Only for special interface routes: the outgoing IP interface name.
Note
The parameters
gateway
and
intf
are mutually exclusive.
OPTIONAL
=>ip rtlist
Destination Label Gateway Intf Mtrc Status
10.0.0.0/24 10.0.0.140 eth0 0 [UP]
10.10.0.0/24 10.0.0.140 eth0 0 [UP]
10.0.0.140/32 10.0.0.140 eth0 0 [UP]
127.0.0.1/32 127.0.0.1 loop 0 [UP]
=>ip rtdelete dst=10.10.0.0/24 src=10.0.0.0/24 gateway=10.0.0.140
=>ip rtlist
Destination Label Gateway Intf Mtrc Status
10.0.0.0/24 10.0.0.140 eth0 0 [UP]
10.0.0.140/32 10.0.0.140 eth0 0 [UP]
127.0.0.1/32 127.0.0.1 loop 0 [UP]
=>
ip rtadd Add a route to the SpeedTouchTM routing table.
ip rtlist Show the current routing table.