THOMSON SpeedTouch 510v5, Reference Manual

Page: 289 / 384

PPPoE Commands
E-DOC-CTC-20040907-0010 v1.0
287
pppoe ifadd
Create a new PPPoE interface.
SYNTAX:
where:
EXAMPLE:
RELATED COMMANDS:
pppoe ifadd [intf = <string>]
[dest = <RELAY | phonebook entry>]
intf The name for the new PPP over Ethernet (PPPoE) interface.
Note
If not specified, the destination parameter must be specified. In this case the
name of the destination will double as interface name.
OPTIONAL
dest The Ethernet port to be used for this PPPoE interface (e.g. an ETHoA name). OPTIONAL
=>pppoe iflist
myPPPoE: dest : myETHoA [local disconnect] [00:00:00]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0 mru = 1492
auth = auto user = johndoe password = ********
admin state = up oper state = down link state = connected
LCP : state = reqsent retransm = 1 term. reason =
IPCP: state = initial retransm = 0 term. reason =
acname : --- service : ---
=>pppoe ifadd intf=yourPPPoE
=>pppoe iflist
myPPPoE: dest : myETHoA [local disconnect] [00:00:00]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0 mru = 1492
auth = auto user = johndoe password = ********
admin state = up oper state = down link state = connected
LCP : state = reqsent retransm = 1 term. reason =
IPCP: state = initial retransm = 0 term. reason =
acname : --- service : ---
yourPPPoE: dest : [00:00:00]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0 mru = 1492
auth = auto user = password =
admin state = down oper state = down link state = not-connected
LCP : state = initial retransm = 9 term. reason =
IPCP: state = initial retransm = 0 term. reason =
acname : --- service : ---
=>
pppoe ifdelete Delete a PPPoE interface.
pppoe iflist Show current configuration of all or a specified PPPoE interface(s).