THOMSON SpeedTouch 510v5, Reference Manual

Page: 24 / 384

CLI Navigation
E-DOC-CTC-20040907-0010 v1.0
22
Command Line Interface Commands
Command Execution
All CLI commands are commands that operate on, or configure, the SpeedTouch
TM
settings.
The CLI commands can be executed:
from top level, preceded by the name of the command group from which the command should be executed.
For example
:firewall list
:
from within the command group itself, using the reduced form of the command. For example :list at the
firewall command group selection.
Entering a CLI Command
A CLI command can be entered in one of the following ways:
1
As a completely built-up command with all its parameters.
For example the command
:firewall assign hook=input chain=input
.
2
Just the command itself without its parameters. After pressing Enter , you are prompted to complete the
command with the required and the optional parameters.
The example below is the equivalent of the command
:firewall assign hook=input chain=input
.
For required CLI command parameter values, either enter a value or scroll through the possible values
with the arrow keys.
For optional CLI command parameters, either enter a value or simply press
Enter
without giving a
value.
=>firewall list
assign hook=input chain=input
assign hook=sink chain=sink
assign hook=forward chain=forward
assign hook=source chain=source
=>
=>firewall
[firewall]=>list
assign hook=input chain=input
assign hook=sink chain=sink
assign hook=forward chain=forward
assign hook=source chain=source
[firewall]=>
=>firewall assign hook=input chain=input
=>
=>firewall assign
hook = input
chain = input
=>
This manner of entering a command is not applicable to all the CLI commands. Examples are
:system config
,
:upnp config
, ...