THOMSON SpeedTouch 510v5, Reference Manual

Page: 240 / 384

Label Commands
E-DOC-CTC-20040907-0010 v1.0
238
RELATED COMMANDS:
prot The protocol (name or number) expected in the IP packet.
Select one of the following protocol names:
icmp
igmp
ipinip
tcp
udp
ah
esp
ipcomp
or, alternatively, specify the protocol number.
OPTIONAL
srcport The TCP/UDP port (or beginning of range) the packet is coming from.
Select one of the supported TCP/UDP port names (see
“ Supported TCP/UDP Port
Names” on page 375 ) or, alternatively, specify the port number.
OPTIONAL
srcportend The source TCP/UDP port range end (inclusive) (only applicable for ranges).
Select one of the supported TCP/UDP port names (see
“ Supported TCP/UDP Port
Names” on page 375 ) or, alternatively, specify the port number.
OPTIONAL
dstport The TCP/UDP port (or beginning of range) the packet is going to.
Select one of the supported TCP/UDP port names (see
“ Supported TCP/UDP Port
Names” on page 375 ) or, alternatively, specify the port number.
OPTIONAL
dstportend The destination TCP/UDP port range end (inclusive) (only applicable for ranges).
Select one of the supported TCP/UDP port names (see
“ Supported TCP/UDP Port
Names” on page 375 ) or, alternatively, specify the port number.
OPTIONAL
clink The name of the chain to be parsed when this rule applies. OPTIONAL
log Logging is done when this rule applies.
Choose between no or yes. OPTIONAL
label Choose between:
None
link (when clink is used)
label name.
REQUIRED
label rule delete Delete a rule.
label rule list Show a list of rules.