THOMSON SpeedTouch 510v5, Reference Manual

Page: 36 / 384

ATM Commands
E-DOC-CTC-20040907-0010 v1.0
34
atm oam ccconfig
Configure Operation and Maintenance (OAM) Continuity Check (CC) on the connection.
SYNTAX:
where:
RELATED COMMANDS:
atm oam ccconfig port = <{dsl0 | dsl1 | atm2 | atm3 | aal5 | atm5} or number>
vpi = <number{0-15}>
[vci = <number{0-511}>]
[transmit = <{disabled | enabled}>]
[receive = <{disabled | enabled}>]
[auto = <{disabled | enabled}>]
[span = <{segment | end2end}>]
port The Asynchronous Transfer Mode (ATM) port number.
Choose between:
DSL0
DSL1
ATM2
ATM3
AAL5
ATM5.
Or specify a port number (dsl0 has port number 0, ..., atm5 has port number 5).
REQUIRED
vpi A number between 0 and 15.
Represents the Virtual Path Identifier (VPI) REQUIRED
vci A number between 0 and 511.
Represents the Virtual Channel identifier (VCI).
For a VP cross-connection, use
VCI=0 or do not specify.
OPTIONAL
transmit Enable or disable transmission of CC cells.
The default is
disabled .
OPTIONAL
receive Enable or disable loss of continuity.
The default is
disabled .
OPTIONAL
auto Enable or disable remote CC activation and deactivation.
The default is
disabled .
OPTIONAL
span Select either:
end2end :monitoring occurs on the entire VC between two ATM end stations.
segment :monitoring occurs on a VC segment between the SpeedTouch
TM
and a
first-hop ATM switch.
OPTIONAL
atm oam cclist Show the current OAM CC configuration.
atm oam ccsend Send CC activate/deactivate to the connection.