Thomson
Thomson Electrak
®
MD Actuator - Installation Manual - 2020-02
26
7.2 Ordering key
Ordering Key
Position
1
2
3
4
5
6
7
8
9
Example
MD12 A025-
0300
XXX
2
N
N
S
D
1. Actuator type and supply voltage
MD12 = Electrak MD, 12 Vdc
MD24 = Electrak MD, 24 Vdc
2. Screw type, dynamic load capacity
A025- = acme screw, 250 N (56 lbs)
A050- = acme screw, 500 N (112 lbs)
A100- = acme screw, 1000 N (225 lbs)
A200- = acme screw, 2000 N (450 lbs)
3. Ordering stroke length
0050 = 50 mm
0100 = 100 mm
0150 = 150 mm
0200 = 200 mm
0250 = 250 mm
0300 = 300 mm
4. Electrak® Modular Control System options
XXX = internal end-of-stroke limit switches
XXP = XXX + analog (potentiometer) position output
EXX = Electronic Monitoring Package
EXP = EXX + analog (potentiometer) position output
LXX = EXX + low-level signal motor switching
LLX = LXX + end-of-stroke indication outputs
LXP = LXX + analog (potentiometer) position output
LLP = LXP + end-of-stroke indication outputs
CNO = EXX + J1939 CAN bus + open-loop speed control
5. Harness option
1 = 0.3 m long cable with flying leads
2 = 1 m long cable with flying leads
6. Rear adapter/mounting flange options
N = forked cross hole for 10 mm pin
7. Front adapter options
N = forked cross hole for 10 mm pin
8. Adapter orientation
S = standard
M = 90 ° turned
9. Connection options
D = flying leads
