Thomson
Thomson Electrak
®
MD Actuator - Installation Manual - 2020-02
5
2. Safety
2.1 Safety notes
• Only properly qualified personnel are permitted to perform mechanical and electrical
installation of this product. Properly qualified personnel are familiar with mechanical or electrical
installation work and have the appropriate qualifications for their job.
• Read this manual and any other available documentation before working on the equipment
that the actuator is or shall be a part of.
• Conform strictly to the information contained in this manual and on the actuator product label
on the actuator. Never exceed the performance limits stated herein.
• Never work on the actuator or its installation with the power on.
• Never unplug any cables or connectors during operation or with power on.
• Immediately stop using the actuator if it seems faulty or damaged in any way and notify an
appropriate person so that corrective actions can be taken.
• Never open the actuator as that will compromise the sealing and the function of the
actuator. There are no serviceable components inside.
• Grease may be present on the extension tube. Contact is non-hazardous. Film should not be
removed.
3. Standards
3.1 EC Declaration of incorporation of partly completed machinery
We, Thomson Linear
declare that this product corresponds with the International Standard ISO 13766:2006-05 2nd Edition
(Earth Moving Machinery, Electromagnetic Compatibility). The directive (MD) 2006/42/EC annex 2.1.B,
RoHSII directive 2011/65/EU, and that the standard EN ISO 12100:2010, Safety of machinery, have been
applied.
Thomson Electrak
®
MD Linear Actuator MDxxAxxx-xxxxxxxxxxxx
Product Description
Can be used when the machine or the system, which it shall be, a part of is in accordance with the
demands in the EEC Machinery Directive and/or other relevant regulations.
Kristianstad 2020-02-12
Date
Håkan Persson Business Unit Manager
Name Title
Signature
