manualshive.com logo in svg

THOMSON DV7213, Reference Manual, Page: 271 / 814

Share
Download
THOMSON DV7213 Reference Manual Download Page 271

E-DOC-CTC-20061027-0009 v2.0

Chapter 13

247

13 Eth Commands

Introduction

This chapter describes the commands of the 

eth

 command group.

Contents

This chapter covers the following commands:

eth ifadd 

Create a new ETH interface.

249

eth ifattach 

Attach an ETH interface.

250

eth ifconfig 

Modify an ETH interface.

251

eth ifdelete 

Delete an ETH interface.

252

eth ifdetach 

Detach an ETH interface.

253

eth iflist 

Display the ETH interfaces.

254

eth flush 

Flush all the ETH interfaces.

255

eth bridge clear 

Clear the bridge statistics.

256

eth bridge list 

Display the current bridge instances.

257

eth bridge add 

Add a new bridge instance.

258

eth bridge delete 

Delete a bridge instance.

259

eth bridge select 

Select the default bridge to configure interfaces  .

260

eth bridge config 

Modify/display the bridge configuration settings.

261

eth bridge dynvlan actlist 

Display the active MAC entries for the dynamic 
VLAN membership.

262

eth bridge dynvlan add 

Add a dynamic VLAN membership entry.

263

eth bridge dynvlan config 

Modify the dynamic VLAN membership 
configuration.

264

eth bridge dynvlan delete 

Delete a dynamic VLAN membership entry.

265

eth bridge dynvlan flush 

Flush all dynamic VLAN membership entries.

266

eth bridge dynvlan list 

Delete a dynamic VLAN membership entry.

265

eth bridge flush 

Flush bridge interfaces and parameters.

268

eth bridge ifadd 

Add a new bridge interface.

269

eth bridge ifattach 

Attach a bridge interface.

270

eth bridge ifconfig 

Modify a bridge interface configuration.

271

eth bridge ifdelete 

Delete a bridge interface.

273

eth bridge ifdetach 

Detach a bridge interface.

274

eth bridge iflist 

Display the current bridge interfaces.

275

eth bridge ifflush 

Flush the bridge interfaces

276

eth bridge igmpsnooping config 

Configure the bridge instance‘s IGMP Snooping 
flags

277

eth bridge igmpsnooping list 

Display a bridge instance‘s  snooped groups

278

Summary of Contents for DV7213















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments