manualshive.com logo in svg

THOMSON DV7213, Reference Manual, Page: 636 / 814

Share
Download
THOMSON DV7213 Reference Manual Download Page 636

E-DOC-CTC-20061027-0009 v2.0

Chapter 34

612

system config

Set/change the system configuration parameters.

SYNTAX:

where:

!

For a good operation of UPnP and the discovery mechanism, it is highly recommended not to 
change the system configuration settings.

system config

[upnp = <{disabled | enabled}>] 
[tr64 = <{disabled | enabled}>]
[mdap = <{disabled | enabled}>]
[drst = <{disabled | enabled}>]
[led = <{green | red | orange | flash | off}>]
[resetbutton = <{disabled | enabled}>] 
[digestauth = <{disabled | enabled}>] 
[defaultconnection = <string>]
[rtc = <{disabled|enabled}>]
[autosave = <{disabled | enabled}>]
[autosavedelay = <number{0-600}>]

upnp

Enable or disable UPnP discovery.
The default is 

enabled

.

OPTIONAL

tr64

Enable or disable TR-64 discovery.
The default is 

disabled

.

OPTIONAL

mdap

Enable or disable proprietary discovery protocol.
The default is 

enabled

.

OPTIONAL

drst

Enable or disable DrSpeedTouch access.
The default is 

disabled

.

OPTIONAL

led

Set the system LED colour.
Choose between:

>

green

: solid green

>

red

: solid red 

>

orange

: solid orange

>

flash

: toggle between green and orange

>

off

: LED is off.

The default is 

green

.

OPTIONAL

resetbutton

Enable or disable reset-to-factory-defaults pushbutton.
The default is 

enabled

.

OPTIONAL

digestauth

Enable or disable HTTP digest authentication.
The default is 

enabled

.

OPTIONAL

defaultconnection

The name of the default internet connection.

OPTIONAL

rtc

Enable or disable RTC.
The default is 

disabled

OPTIONAL

autosave

Enable or disable autosaves.
The default is 

enabled

.

OPTIONAL

Summary of Contents for DV7213















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments