manualshive.com logo in svg

THOMSON DV7213, Reference Manual, Page: 428 / 814

Share
Download
THOMSON DV7213 Reference Manual Download Page 428

E-DOC-CTC-20061027-0009 v2.0

Chapter 21

404

ip config

Show/set global IP stack configuration options.

SYNTAX:

where:

ip config

[forwarding = <{disabled | enabled}>]
[redirects = <{disabled | enabled}>]
[checkoptions = <{disabled|enabled|transparent}>]
[netbroadcasts = <{disabled | enabled}>]
[ttl = <number{0-255}>]
[defragmode = <{disabled | enabled}>]
[addrcheck = <{off | own | static | dynamic}>]
[mssclamping = <{disabled | enabled}>]
[natloopback = <{disabled|enabled}>]
[loadbalancing = <{disabled|roundrobin}>] 
[bitrate-window(sec) = <number{10-3600}>]
[acceleration = <{disabled|enabled}>]

forwarding

Disable or enable the IP routing functionality.
The default is 

enabled

.

OPTIONAL

redirects

Disable or enable the sending of ICMP redirect messages.
A router can send a redirect message in case a shorter path than the 
path followed is discovered.
The default is 

enabled

 (for security reasons).

OPTIONAL

checkoptions

Disallow/Allow packets with IP options.
The default is 

enabled

.

OPTIONAL

netbroadcasts

Disable or enable net directed broadcasts.
The default is 

disabled

.

In case netbroadcasts are allowed, no traces of netbroadcasts are 
generated.

OPTIONAL

ttl

A number between 0 and 255.
Represents the default Time To Live (TTL) for locally generated IP 
packets. This parameter determines the number of hop counts the IP 
packet may pass before it is dropped.
By limiting the TTL, continuous circulation of IP packets on the 
network without ever reaching a destination is avoided.
The default is 

64

.

OPTIONAL

defragmode

Disallow (disabled) or allow (enabled) defragmenting IP fragments.
The default is 

enabled

.

OPTIONAL

Summary of Contents for DV7213















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments