manualshive.com logo in svg

THOMSON DV7213, Reference Manual, Page: 561 / 814

Share
Download
THOMSON DV7213 Reference Manual Download Page 561

E-DOC-CTC-20061027-0009 v2.0

Chapter 28

537

silent

Do not send anything at startup and just listen for incoming LCP 
messages (enabled) or retry up to 10 times to establish the 
connection (disabled).
The default is 

disabled

.

OPTIONAL

echo

Send LCP echo requests at regular intervals (enabled) or not 
(disabled).
The default is 

disabled

.

OPTIONAL

mru

A number between 293 and 8192.
Represents the maximum packet size the Thomson ST should 
negotiate to be able to receive.
The default is 

1492

.

OPTIONAL

laddr

The local IP address of the peer-to-peer connection.
Specifying a local IP address forces the remote side of the PPP link (if 
it allows to) to accept this IP address as the Thomson ST PPP session 
IP address. 
If not specified, the Thomson ST will accept any IP address.
Typically the local IP address parameter is not specified.

OPTIONAL

raddr

The remote IP address of the peer-to-peer connection.
Specifying a remote IP address forces the remote side of the PPP link 
(if it allows to) to accept this IP address as its PPP session IP address.
If not specified, the Thomson ST will accept any IP address.
Typically the remote IP address parameter is not specified.

OPTIONAL

netmask

The subnetmask associated with this address.
Specifying a subnetmask forces the remote side (if it allows to) to 
accept this subnetmask as the PPP session subnetmask.
If not specified, the Thomson ST will accept any subnetmask.
The Thomson ST will only request/accept a subnetmask if a DHCP 
server pool is associated, in other words, if the [pool] parameter is 
specified.

OPTIONAL

format

The negotiated subnetmask specified in the netmask parameter is 
specified in the dotted format (dotted) or in Classless Inter Domain 
Routing (CIDR) format (cidr).
The default is 

cidr

.

OPTIONAL

pool

The name of the free DHCP server pool to which the acquired IP 
subnet must be assigned.

OPTIONAL

savepwd

Save password (enabled), if supplied, or do not save the password 
(disabled).
The default is 

disabled

.

OPTIONAL

demanddial

Enable or disable the dial-on-demand feature.
The default is 

disabled

.

OPTIONAL

doddelay

A number between 0 and 3600 (seconds).
During this initial interval,  packets do not trigger the PPP interface.

OPTIONAL

primdns

The IP address of the primary DNS server.
In case a primary DNS server is specified, the Thomson ST will 
negotiate this IP address with the remote side.

Note

If not specified, the Thomson ST will accept any IP address.

OPTIONAL

secdns

The IP address of the (optional) secondary DNS server.
In case a secondary DNS server is specified, the Thomson ST will 
negotiate this IP address with the remote side.

Note

If not specified, the Thomson ST will accept any IP address.

OPTIONAL

Summary of Contents for DV7213















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments