THOMSON DV7213 Reference Manual Download Page 158

Page: 158 / 814

E-DOC-CTC-20061027-0009 v2.0

Chapter 8

134

dhcp relay ifconfig

Configure a DHCP relay interface.

SYNTAX:

where:

dhcp relay ifconfig

intf = <string>
[relay = <{disabled | enabled}>]
[maxhops = <number{0-16}>]
[remoteid = <password>]
[trusted = <{disabled | enabled}>]

intf

The name of the dynamic interface to be configured.

REQUIRED

relay

Set the relay status to enabled or disabled.
The default is

disabled

OPTIONAL

maxhops

A number between 0 and 16.
Represents the maximum number of hops allowed in the
DHCP packet.
The default is

OPTIONAL

remoteid

Set the remote ID as specified in RFC3046.

OPTIONAL

trusted

Drop/forward DHCP request packet when the DHCP Relay
Agent Option is enabled (with the command

:dhcp relay

config agentinfo=enabled

) and the giaddr field is 0

(RFC3046)) (enabled) or not (disabled).
The default is

disabled

OPTIONAL

Summary of Contents for DV7213














































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DV7213

Reviews:

THOMSON DV7213, Reference Manual, Page: 158 / 814

Search results

Summary of Contents for DV7213

Reviews: