manualshive.com logo in svg

THOMSON DV7213, Reference Manual, Page: 433 / 814

Share
Download
THOMSON DV7213 Reference Manual Download Page 433

E-DOC-CTC-20061027-0009 v2.0

Chapter 21

409

ip ifconfig

Configure the parameters of an IP interface.

SYNTAX:

where:

ip ifconfig

intf = <string>
[mtu = <number{68-65535}>]
[status = <{down | up}>]
[hwaddr = <hardware-address>]
[group = <string> or number]
[linksensing = <{disabled | enabled}>]
[primary = <{disabled | enabled}>]
[mcastpromisc = <{disabled|enabled}>]

intf

The name of the IP interface to be configured.

REQUIRED

mtu

A number between 68 and 65535.
Represents the MTU (the maximum packet size (including IP 
header)) to be used on this interface.

Note

The default value depends on the connection and packet 
service for which the interface was created.

OPTIONAL

status

The administrative state of the interface.
Choose between:

>

down

>

up

.

OPTIONAL

hwaddr

The hardware address (for example the Ethernet MAC address) of 
this IP interface.

OPTIONAL

group

The group to which this interface belongs. Can be used for 
firewalling, for example.

OPTIONAL

linksensing

The IP interface's awareness of link state transitions.
The default is 

enabled

.

OPTIONAL

primary

Make the IP interface the primary interface (enabled) or not 
(disabled).
The default is 

disabled

.

OPTIONAL

mcastpromisc

Make the IP interface multicast promiscuous.
Choose between:

>

disabled

>

enabled

The default is 

disabled

.

OPTIONAL

Summary of Contents for DV7213















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments