manualshive.com logo in svg

THOMSON DV7213, Reference Manual, Page: 225 / 814

Share
Download
THOMSON DV7213 Reference Manual Download Page 225

E-DOC-CTC-20061027-0009 v2.0

Chapter 9

201

dns server route add

Creates a DNS forwarding entry or template.

SYNTAX:

where:

dns server route add

dns = <ip-address>
[src = <ip-address>]
[srcmask = <ip-mask(dotted or cidr)>]
[domain = <string>]
[metric = <number{0-100}>]
[intf = <string>]

dns

The IP address of a DNS server. If 0.0.0.0 is used, the entry becomes a 
DNS-Template which is instantiated if DNS Server IPs are configured 
on an IP interface.

REQUIRED

src

The source IP address(es) using this remote DNS server. If specified, 
only DNS queries from machines of which the source IP  address 
matches the source prefix of the DNS entry will be forwarded to the 
corresponding DNS server.

Note

Supports IP/mask notation.

OPTIONAL

srcmask

The source IP address mask.

OPTIONAL

domain

The DNS Domain matching string. If configured, only those DNS 
queries of which      the domain name in the query matches with the 
string configured for the entry will be forwarded to the corresponding 
DNS Server. Maximum string length: 62 characters.

OPTIONAL

metric

A number between 0 and 100. Represents the metric (weight factor) for 
this DNS route. The DNS Entry List is sorted on DNS Metric: the lower 
the metric, the higher the priority of the entry.

OPTIONAL

intf

An interface name.
The interface associated with the DNS entry or DNS Template. DNS 
queries will only be forwarded on the specified interface.

Note

In no interface is specified, DNS queries will be forwarded on 
all interfaces.

OPTIONAL

Summary of Contents for DV7213















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments