THOMSON DV7213 Reference Manual Download Page 321

Page: 321 / 814

E-DOC-CTC-20061027-0009 v2.0

Chapter 14

297

intfgroup

The IP interface group.
Choose between:

wan

local

lan

tunnel

dmz

guest.

Note

Only for expression type

intf

OPTIONAL

tos

A number between 0 and 255.
Represents the Type of Service (ToS) specification in the IP
packet.

Note

The parameters

tos

precedence

and

dscp

are mutually

exclusive.

OPTIONAL

precedence

The precedence in the IP packet (part of tos).
Select an IP precedence (see

“ IP Precedence” on page 772

) or,

alternatively, specify the number.

Note

The parameters

tos

precedence

and

dscp

are mutually

exclusive.

OPTIONAL

dscp

The Differentiated Services Code Point (DSCP) in the IP packet
(part of tos).
Select a DSCP (see

“ Differentiated Services Code Point (DSCP)”

on page 773

) or, alternatively, specify the number.

Note

The parameters

tos

precedence

and

dscp

are mutually

exclusive.

OPTIONAL

proto

The protocol (name or number) expected in the IP packet.
Select one of the following protocols:

icmp

igmp

ipinip

tcp

udp

esp

ipcomp

or, alternatively, specify the protocol

number.

OPTIONAL

srcport

The TCP/UDP port (or beginning of range) the packet is coming
from.
Select one of the supported TCP/UDP port names (see

“ Supported TCP/UDP Port Names” on page 767

) or,

alternatively, specify the port number.

OPTIONAL

srcportend

The source TCP/UDP port range end (inclusive).
Select one of the supported TCP/UDP port names (see

“ Supported TCP/UDP Port Names” on page 767

) or,

alternatively, specify the port number.

OPTIONAL

dstport

The TCP/UDP port (or beginning of range) the packet is going to.
Select one of the supported TCP/UDP port names (see

“ Supported TCP/UDP Port Names” on page 767

) or,

alternatively, specify the port number.

OPTIONAL

dstportend

The destination TCP/UDP port range end. (inclusive).
Select one of the supported TCP/UDP port names (see

“ Supported TCP/UDP Port Names” on page 767

) or,

alternatively, specify the port number.

OPTIONAL

icmptype

The Internet Control Message Protocol (ICMP) type (name or
number) of the packet.
Select one of the supported ICMP types (see

“ Supported ICMP

Type Names” on page 770

) or, alternatively, specify the type

number.

OPTIONAL

Summary of Contents for DV7213














































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DV7213

Reviews:

THOMSON DV7213, Reference Manual, Page: 321 / 814

Search results

Summary of Contents for DV7213

Reviews: