THOMSON DV7213, Reference Manual, Page: 285 / 814

E-DOC-CTC-20061027-0009 v2.0
Chapter 13
261
eth bridge config
Modify/display the bridge configuration settings.
SYNTAX:
where:
eth bridge config [brname = <{bridge}>]
[age = <number{10-100000}>]
[filter = <{no_WAN_broadcast | none}>]
[vlan = <{disabled | enabled}>]
[precedencemap = <string>]
brname The name of a bridge instance
age A number between 10 and 100000 (seconds).
Represents the lifetime of a dynamically learned Medium Access
Control (MAC) address.
The default is
300 .
OPTIONAL
filter The bridge filter to be applied for all Wide Area Network (WAN)
bridge ports.
Choose between:
>
no_WAN_broadcast : broadcasts from the Thomson ST itself
to the WAN are filtered out, broadcasts from the LAN to the
WAN are still passed through
>
none : no broadcasts are filtered out.
The default is no_WAN_broadcast .
OPTIONAL
vlan Enable or disable the use of the VLAN ID of the received VLAN
packets.
The default is
enabled .
OPTIONAL
precedencemap The IP QoS precedence mapping table OPTIONAL