THOMSON DD10, Installation Manual

Page: 124 / 179

7. Description of the Interface Diamond digital
115
The presentation on the display is mostly made with 4 characters. At the UMDs
for CLEAN FEED and for the DVEs, alternatively an 8-character display can be se-
lected.
Adjustment is made via the softkey ”8-CHAR UMD’s” in the menu Config Panel
of the mixer.
Softkey ”8-CHAR UMD’s
Notes to the address adjustment:
1) The displays for the 32 inputs show the 4-digit source name.
2) The displays for the three outputs can show the following:
a) The source name of the input being visible in the output picture, if
it is the only picture component,
b) ”....”, when a mixed picture is at the output,
c) ”FTB”, when the output has been faded to black with the
fade-to-black function.
3) The displays for the PVW ME1 / ME2 / PP Preview can show the following:
a) ”PROG”, when no Preview is selected,
b) ”AKAx”, when the cursor for Auto-Chroma-Key-Adjustment is
selected,
c) the states of the next transition keys are displayed with graphical
symbols (on/off).
e.g.
”_ _ ”
In this case: NXT BGD A = off,
NXT BGD B = on,
NXT KEY 1 = off,
NXT KEY 2 = on
This preview mode is displayed when Look–Ahead-Preview
is switched on.
d) ”TRAN”, when Transition Preview is selected.
e) ”KEYx”, when Key Preview is selected (Video: Key to background)
f) ”keyx”, when Key Preview is selected (Video: pure key signal (SW))
g) ”MSKx”, when Mask Preview is selected
h) 4–digit source name of the DSK2, when PP-Preview = DUAL or CASC
is selected.
x = 1 or 2 for ME1,
4 or 5 for ME2
7 or 8 for PP